Heat Press Instructions

Factory Press Standards

DTF Louisville Heat Press & Application Instructions

Every heat press calibrates slightly differently. Use these baseline parameters to achieve crisp edges, vivid pigmentation, and commercial wash endurance.

Temperature

290°F – 320°F

145°C to 160°C

Duration

8 – 9 Seconds

Rapid cycle

Pressure

High / Max

Firm mechanical clamp

Four-Step Application Cycle

Hot Peel Only

Garment Prep & Alignment

Smooth out all moisture and wrinkles with a short 2–3 second pre-press. Center and place your transfer graphic face-up.

Primary Press

Clamp at 290°F – 320°F for 8 to 9 seconds using maximum pressure to fuse the hot-melt powder into the yarn.

Immediate Hot Peel

Peel the transfer film right away while hot. Pull sideways smoothly across the garment at a low angle without jerking upwards.

Finishing & Seal Press

Cover with parchment paper or Teflon and press for 5 seconds. This locks the design, eliminates gloss, and boosts wash fastness.

Washing & Garment Longevity Rules

Cold Cycle Only

✓ Invert garment inside out before washing

✓ Cold water wash with mild detergent

✓ Air dry flat or tumble dry low heat

✕ No bleach, fabric softener, or dry cleaning

✕ Never iron directly on top of the transfer