News

October 6, 2026
0 comments

What Are White Edges in DTF and Why Do They Happen?

If you have ever pressed a DTF transfer and noticed a thin white line around your design, you are not alone. That faint outline is one of the most common issues in DTF printing, and it shows up most on...

September 28, 2026
0 comments

5 DTF Gang Sheet Builder Hacks to Cut Your Ordering Time in Half

If you have ever spent an hour dragging tiny logos around a screen, you know how frustrating ordering DTF transfers can feel. You just want to print, press, and ship. Instead, you are stuck resizing, rotating, and trying to squeeze...

September 25, 2026
0 comments

Learn How to Use DTF Gang Sheets to Take on Corporate and School Orders

Corporate and school orders are where print shops make real money, but they can also break your workflow if you handle them one design at a time. DTF gang sheets change that completely. They let you put dozens of different...

September 23, 2026
0 comments

Beyond Tumblers: 7 Surprising Things You Can Make With UV DTF Transfers on Acrylic

If you think UV DTF is only for tumblers, you're missing the most profitable part of the market. Acrylic is where shops are seeing real margins right now, and **uv dtf transfers on acrylic** make it possible without a heat...

September 23, 2026
0 comments

UV DTF Tumbler Size Guide: How to Measure and Gang Print Wraps That Fit Perfectly

If your UV DTF transfers for tumblers are wrinkling, leaving a thick overlap seam, or looking too short on the cup, it's almost always a sizing problem. Tumblers that are all called 20oz can measure very differently between brands, and...

September 21, 2026
0 comments

UV DTF on Plastic Signs: Which Plastics Survive Sun and Rain and Which Crack in 3 Months

If you're putting UV DTF transfers on plastic signs that will live outside, the plastic you choose matters more than the transfer itself. Some plastics hold color and adhesive for 2 plus years in sun and rain. Others crack, yellow,...

September 15, 2026
0 comments

How to Prep Glass for UV DTF: Alcohol vs Soap vs Primer for Long-Lasting Adhesion

If your UV DTF transfers lift at the edge after a week on glass cups, the problem didn't start when you peeled the film. It started with how you prepped the glass. Glass looks clean but it holds manufacturing oils,...

September 11, 2026
0 comments

Why UV DTF Transfers Peel Off Stainless Steel Tumblers: Heat, Coating, and Surface Prep Mistakes

If your UV DTF transfers on stainless steel look perfect in the shop and then lift on the tumbler a week later, you're not alone. This is the most common complaint we hear from shops moving from cups to metal....

September 4, 2026
0 comments

How to Fit More Logos, Chest Prints & Pocket Designs on One DTF Gang Sheet

If you've ever stared at a half-empty DTF Gang Sheet and wondered where your profit went, you're not alone. Fitting more logos, chest prints, and pocket designs on one sheet isn't about squeezing harder. It's about grouping smarter. In this...

1 2 3 … 9 Next